“Excellent, easy to use website. Good communication with regards to logo quality. Sign arrived in good time, is good quality and looks good at our office.”
- Looking for more information?
- Ask a question and our experts will answer it.
Product Details
Made in the UK, crafted from FSC-certified European Redwood at our own production facility.
Wall-mounted design, frees up floor space while still giving you a dedicated, highly visible writing surface.
Fixed 3mm easy-clean melamine panel, a smooth, even writing surface that wipes clean with a damp cloth.
Works with chalk and liquid chalk pens, so you can change your message as often as you need.
Five frame stain colours, Westminster Oak, Dark Oak, White Wash, Black Ash or Slate Grey to complement any interior.
Three sizes available, A3, A2 and A1 to suit anything from a small menu display to a full daily specials board.
Supplied with wall fixings, everything you need to get it up and writing straight away.
For interior use only, the 3mm melamine panel is ideal for dry indoor environments.
1 x Spitfire framed chalkboard wall board
Wall fixing hardware
The Spitfire Wall Board is designed for interior use only. The 3mm melamine panel performs well in dry indoor environments such as restaurants, cafés, offices, shops and classrooms, but must not be installed outdoors or in damp or high-humidity rooms.
Liquid chalk wipes off cleanly with a damp cloth. Traditional chalk may leave a faint ghost mark on darker stain colours; a slightly damp cloth with a little extra pressure will clear it fully. For a completely fresh surface, a small amount of white spirit on a cloth can remove residual staining without damaging the melamine.
The board is supplied with fixings suitable for solid walls. If fixing to plasterboard or dot-and-dab walls, use appropriate cavity fixings available from any hardware shop.
SizeOverall Size (W x H)Visible Board Size (W x H)WeightCode
A3297 x 420mm209 x 332mm0.7 kgSPIW-SA3 A2420 x 594mm332 x 506mm1.1 kgSPIW-SA2 A1594 x 841mm506 x 753mm2.0 kgSPIW-SA1
Hold the board against the wall in your chosen position and use a pencil to mark the fixing point locations.
Set the board aside. Drill pilot holes at the marked positions, using the correct bit size for your wall type.
If fixing to masonry or plasterboard, insert the appropriate wall plugs before continuing.
Drive the supplied screws into the wall, leaving the heads slightly proud of the surface.
Hang the board onto the screws through the keyhole slots on the back of the frame.
Slide the board downward until the screws lock into the narrow part of each slot.
Check the board is level and adjust the screw depths if needed.
