“Excellent, easy to use website. Good communication with regards to logo quality. Sign arrived in good time, is good quality and looks good at our office.”
- Looking for more information?
- Ask a question and our experts will answer it.
Product Details
PVC free high tack printed wall graphics, made from satin matt white polypropylene and free of any plasticiser. Our PVC free wall graphics are also recyclable, keeping your businesses' carbon footprint as low as possible!
Printed with durable high quality UV inks, this product can be used on both internal and external smooth sealed wall surfaces.
- Free of PVC and plasticisers.
- Made from white satin polypropylene.
- Printed with durable high quality UV inks.
- High tack grey adhesive to block out wall surface below.
- Perfect for wall graphics.
- Internal and external application on sealed smooth surfaces.
Ideal for wall graphics, our PVC free self adhesive graphics can also be used on smooth sealed external surfaces and should last for two years.
Our PVC-free printed wall vinyl is the perfect solution for creating beautiful, eye-catching wall graphics. Printed on a durable polypropylene, our wall vinyl is a great way to add personality to your space. Whether you're looking to create a custom mural or just give your office a little bit of personality, our PVC free printed wall vinyl is the perfect solution.
What's included with this purchase:
- 1 x PVC Free polypropylene wall graphic printed on high tack wall vinyl supplied in drops to suit your design
Wall Assessment
Ensure the wall is smooth, ideally with a satin or gloss paint finish. Certain paint additives, low latex, and VOC levels can reduce adhesive bond. Avoid 'easy care' and 'easy clean' paints.
If unsure of the paint type, trial a sample print for 24 hours before full installation. Apply a primer if there is any doubt about surface suitability.
Freshly painted walls need up to 5 days to dry; newly plastered walls need up to 4 weeks.
Repositionable/low tack adhesives are unsuitable for coated or treated surfaces like stainless steel, brass, or bronze. Dusty surfaces can contaminate adhesive and reduce bond strength. Priming is recommended for these adhesives.
Wall temperature should be above +4°C, ideally above 10°C. Avoid applying to brick or heavily textured finishes unless using approved media like General Formulations’ RoughMark vinyl. Always test print first.
Priming the Walls
Priming reduces adhesive contamination, improves bond strength, counters wall moisture, and masks surface imperfections. Use a water-based eggshell or recognized wall primer and adhere to drying times.
Wall Graphic Printing & Artwork Considerations
Heavy deposits of uncured solvent or UV inks can affect film stability and adhesive strength. Fully cure, dry, and outgas prints before packaging or application, allowing 24 hours as a guide.
Polyester and PVC materials may shrink over time. Allow a 10mm overlap in prints. For textured surfaces, a larger overlap may be needed. For promotional applications, splice the join by overlapping and cutting through both layers to remove excess material.
How to Apply the Wall Graphic
For small decals:
- Remove the liner and position the graphic.
- Use a squeegee from the middle to the edges to avoid air bubbles.
- Ensure edges and corners are firmly attached.
For large decals:
- Lay face down, peel back part of the liner, and fold down.
- Align and apply the top portion with a squeegee.
- Slowly remove the remaining liner while pressing the decal to the wall.
- Work towards the edges to avoid air bubbles.
- Ensure edges and corners are firmly attached.
How to Remove the Wall Graphic
Gently peel from top to bottom at a 120-degree or greater angle using smooth, consistent force.
No liability for damage to painted surfaces as this depends on the paint-wall bond, which is beyond our control.