“Excellent, easy to use website. Good communication with regards to logo quality. Sign arrived in good time, is good quality and looks good at our office.”
- Looking for more information?
- Ask a question and our experts will answer it.
Product Details
Made to order in the UK, laser cut at our own facility from Perspex cast acrylic sheet, with consistent edge quality on every order.
Matt white finish, a soft, non-reflective surface that suits spaces where gloss would be too bright or create distracting light scatter, including offices, galleries, hotels and modern retail environments.
Available in 3mm, 5mm and 10mm thickness, letting you dial in the right visual weight for your space and design brief.
Precision laser cut to your artwork, text, logo or custom shape cut from your vector file to a clean, sharp edge throughout.
Full-scale installation jig supplied, a paper template with every order so you can mark your fixing positions accurately before any drilling begins.
VHB tape or SnapFix stand-off locators, VHB tape pre-applied for a direct adhesive fix, or SnapFix locators for a 15mm shadow standoff on elements wider than 15mm.
Not printed, the colour is the material, so the finish stays consistent over time with no risk of the surface fading or peeling.
1 x Set of matt white acrylic letters or logo shapes, laser cut to your artwork
VHB tape pre-applied to reverse, or SnapFix stand-off locators (as selected)
Full-scale installation template
PDF artwork proof before production begins
Artwork must be supplied as a vector file (AI, EPS, PDF with outlines) or a DXF cut path. Raster images cannot guide a laser cutter. Each element of your design is cut as a separate piece, so very fine detail or thin strokes may not translate cleanly into acrylic. Our studio team will review your artwork on receipt and raise anything that needs attention before cutting begins.
Stand-off fixings are only available on elements with a minimum width of 15mm. Elements narrower than this will be supplied with VHB tape only.
Matt white is particularly well suited to spaces with strong directional lighting, where a gloss surface would scatter light and reduce legibility. It also works well in environments where a softer, more considered aesthetic is preferred over the higher-contrast gloss finish. Note that against a bright white or very pale wall, the contrast may be limited; a mid-tone or darker wall surface will give the best visual result.
Minimum size: 100mm in either dimension.
Lay the supplied full-scale installation template against the wall in your chosen position and mark the fixing point locations in pencil or chalk.
If using SnapFix stand-off locators, drill the marked positions and fit the female cups into the wall using the supplied hardware. Remove the template.
Offer each letter up to its corresponding cup positions and press firmly to click the male locators into place.
If using VHB tape, clean the wall surface with an alcohol wipe and allow to dry fully. Remove the tape backing from each letter in turn, position it against the template and press firmly to the wall for at least 30 seconds.
Step back and check the finished result before removing the template completely.
