“Excellent, easy to use website. Good communication with regards to logo quality. Sign arrived in good time, is good quality and looks good at our office.”
- Looking for more information?
- Ask a question and our experts will answer it.
Product Details
Made to order in the UK, laser cut at our own facility from Perspex cast acrylic sheet, so quality is consistent across every letter and every order.
Matt black finish, a non-reflective surface with a strong, confident look that is particularly effective against white, cream or light grey walls, where the contrast carries from a distance.
Available in 3mm, 5mm and 10mm thickness, so you can choose a discreet profile or a bolder set of letters that casts a visible shadow and adds real depth to the wall.
Precision laser cut to your artwork, text, logo or custom shape cut from your vector file with clean, accurate edges throughout.
Full-scale installation jig supplied, a paper template with every order for accurate marking and drilling before the letters go up.
VHB tape or SnapFix stand-off locators, pre-applied VHB tape for a direct adhesive fix, or SnapFix stand-off locators for a 15mm shadow effect on elements wider than 15mm.
Not printed, the matt black colour comes from the acrylic material itself, giving a finish that stays consistent over time without fading or peeling.
1 x Set of matt black acrylic letters or logo shapes, laser cut to your artwork
VHB tape pre-applied to reverse, or SnapFix stand-off locators (as selected)
Full-scale installation template
PDF artwork proof before production begins
Artwork must be supplied as a vector file (AI, EPS, PDF with outlines) or a DXF cut path. Raster images cannot be used as a laser cut guide. Each element of your design is cut as a separate piece, so very fine detail, thin strokes or small text may not translate cleanly into acrylic. Our studio team reviews every artwork file on receipt and will raise anything that needs adjusting before production begins.
Stand-off fixings are only available where the minimum width of each cut element is at least 15mm. Elements narrower than this will be supplied with VHB tape only. If your design has fine detail, mention this when ordering and we can advise the right approach.
Matt black works best against lighter wall surfaces where the contrast between the letters and the background is strong. The 10mm thickness option adds the most shadow depth and gives the greatest visual presence from a distance. If you need a gloss black finish rather than matt, please let us know in the special requirements field at checkout and we will accommodate this.
Minimum size: 100mm in either dimension.
Lay the supplied full-scale installation template against the wall in your chosen position and mark the fixing point locations in pencil or chalk.
If using SnapFix stand-off locators, drill the marked positions and fit the female cups into the wall using the supplied hardware. Remove the template.
Offer each letter up to its corresponding cup positions and press firmly to click the male locators into place.
If using VHB tape, clean the wall surface with an alcohol wipe and allow to dry fully. Remove the tape backing from each letter in turn, position it against the template and press firmly to the wall for at least 30 seconds.
Step back and check the finished result before removing the template completely.
