“Excellent, easy to use website. Good communication with regards to logo quality. Sign arrived in good time, is good quality and looks good at our office.”
- Looking for more information?
- Ask a question and our experts will answer it.
Product Details
Made to order in the UK, produced at our own in-house facility from premium Perspex cast acrylic sheet, so every sign arrives to a consistently high standard.
Gloss white finish, 5mm thick, a bright, light-reflective surface that gives your design the same premium feel as a quality printed panel, with clean glass-like edges around the full cut outline.
Laser cut to your exact shape, contour cut to one external outline so your sign follows the natural form of your logo, text or graphic rather than sitting inside a rectangle.
UV digital full-colour print, high-quality UV inks applied directly to the white face, giving you accurate, vibrant colour reproduction without the need for a white backing layer.
Completely waterproof, UV inks cure hard to the acrylic surface and resist fading in sunlight and rain, making this sign equally suited to indoor and outdoor permanent use.
Choice of fixings, supplied plain, with aluminium wall spacers that stand the sign 20mm from the wall, VHB tape for a direct adhesive fix, or button-fix locators for a mechanical fit.
Approved Perspex fabricator, our team works exclusively with branded cast acrylic and has the expertise to cut and print to a standard that holds up close-up as well as from a distance.
1 x Gloss white acrylic sign, cut to your specified shape and printed with your artwork
Fixings as selected at time of order
PDF artwork proof before production begins
Artwork should be supplied as a vector file (AI, EPS, or PDF with outlines) or a high-resolution PNG or JPG at 100dpi or above at full print size. Text must be outlined if your file is vector-based. The cut path follows one external outline, so highly intricate designs or shapes with internal cut-outs may not be achievable. If any element cannot be laser cut, our studio team will discuss substituting it with vinyl rather than hold up your order.
Because the substrate is white, your artwork colours will print much as they appear on screen, without the need to add a white ink flood or spot layer. This makes gloss white acrylic the most straightforward substrate for complex, full-colour designs and photographic imagery. If your artwork includes very light or pastel tones, they will read cleanly on the white surface in a way they might not on a black or dark acrylic alternative.
The gloss surface is bright and reflective. In spaces with strong overhead or directional lighting, this can create a degree of glare when viewed from certain angles. If your installation area has this kind of lighting, consider whether a matt white finish might suit better.
Minimum size: 100 x 100mm. Maximum size: 2000mm wide x 1500mm tall. The standard thickness is 5mm.
Remove the sign from its packaging and peel away any protective masking film from the face and reverse.
If you selected aluminium wall spacers, mark the hole positions on the wall using the locations shown on your production proof. Drill and rawl plug as required, then fit the standoff bases. Offer the sign over the bases and tighten the caps to hold it in place.
If you selected VHB tape, clean the wall surface thoroughly with an alcohol wipe and allow to dry fully. Remove the tape backing from the sign and press it firmly to the wall. Apply steady pressure across the full face for at least 30 seconds. VHB tape requires a smooth, sealed surface and is not suitable for rough render, painted brick or porous substrates.
If you selected button-fix locators, use the template supplied to mark and drill the female cup positions on the wall. Tap the cups into the holes, then align the male locators on the sign reverse and press firmly into place.
