“Excellent, easy to use website. Good communication with regards to logo quality. Sign arrived in good time, is good quality and looks good at our office.”
- Looking for more information?
- Ask a question and our experts will answer it.
Product Details
Clear wall graphics printed on Aslan DFP65 WrapTheHouse transparent vinyl works perfectly on internal or external surfaces, both flat and textured.
Simply enter the size of your wall to grab an instant price or contact our team if you have a more complex project for a custom quotation.
Your clear wall vinyl graphic will be produced on our high-quality wide format printers. Aslan DFP65 Wrap the House transparent wall vinyl does not need an additional over laminate. All custom wall graphics are split into drops and supplied with 10mm overlaps to make the install easier.
Aslan clear wall vinyl will last for three years externally when applied with heat. It will also remove residue free up to 6 months after application. One of the big benefits of using a clear wall vinyl is you can apply intricate designs to the wall surface whilst still being able to see the original wall in clear areas of the design.
We advise that when ordering your clear wall graphics online, that you add 100mm extra length to your drops to cover any inconsistency in your wall height and also add 200mm to the width. Vinyl is very easy to trim so by adding this extra you will make sure that you don't fall short when it comes to installation
If you would prefer your clear wall graphics are professionally installed then please get in touch and we can give you a custom quotation.
What's included with this purchase:
- 1 x Clear printed wall graphic on Aslan DFP65 WrapTheHouse transparent supplied in drops
Price Match Service
If you can find a sign of the same specifications elsewhere then we will do our best to price match against it. As a direct manufacturer we are able to pass significant cost savings on to our clients and for that reason we are very rarely beaten on price. Beware, not all signs are made with the same care and attention, we only use branded materials for our signage.
Delivery
All of our signs are delivered via DPD courier as standard. If your clear wall graphic is larger than this service allows we will contact you directly to arrange alternative methods of delivery including pallet or dedicated vehicles. On some occasions we might need to allow an additional cost for certain services.
You are in safe hands
Currently we have a 4.78 rating from over 9000 reviews on review.io with a 96% recommendation rating. UK Sign Shop is owned by Arcola Products, a manufacturer with over 50 years of sign making experience. Our team of professional account handlers are accessible by email or phone Monday to Friday 8am – 6pm if you have any questions.
Wall Assessment
Ensure the wall is smooth, ideally with a satin or gloss paint finish. Certain paint additives, low latex, and VOC levels can reduce adhesive bond. Avoid 'easy care' and 'easy clean' paints.
If unsure of the paint type, trial a sample print for 24 hours before full installation. Apply a primer if there is any doubt about surface suitability.
Freshly painted walls need up to 5 days to dry; newly plastered walls need up to 4 weeks.
Repositionable/low tack adhesives are unsuitable for coated or treated surfaces like stainless steel, brass, or bronze. Dusty surfaces can contaminate adhesive and reduce bond strength. Priming is recommended for these adhesives.
Wall temperature should be above +4°C, ideally above 10°C. Avoid applying to brick or heavily textured finishes unless using approved media like General Formulations’ RoughMark vinyl. Always test print first.
Priming the Walls
Priming reduces adhesive contamination, improves bond strength, counters wall moisture, and masks surface imperfections. Use a water-based eggshell or recognized wall primer and adhere to drying times.
Wall Graphic Printing & Artwork Considerations
Heavy deposits of uncured solvent or UV inks can affect film stability and adhesive strength. Fully cure, dry, and outgas prints before packaging or application, allowing 24 hours as a guide.
Polyester and PVC materials may shrink over time. Allow a 10mm overlap in prints. For textured surfaces, a larger overlap may be needed. For promotional applications, splice the join by overlapping and cutting through both layers to remove excess material.
How to Apply the Wall Graphic
For small decals:
- Remove the liner and position the graphic.
- Use a squeegee from the middle to the edges to avoid air bubbles.
- Ensure edges and corners are firmly attached.
For large decals:
- Lay face down, peel back part of the liner, and fold down.
- Align and apply the top portion with a squeegee.
- Slowly remove the remaining liner while pressing the decal to the wall.
- Work towards the edges to avoid air bubbles.
- Ensure edges and corners are firmly attached.
How to Remove the Wall Graphic
Gently peel from top to bottom at a 120-degree or greater angle using smooth, consistent force.
No liability for damage to painted surfaces as this depends on the paint-wall bond, which is beyond our control.
